Decorations made only and exclusively by hand
Painting without the use of transparent varnish as originally
Original brands of the period in copal varnish
← Scroll the images to view them →
Berkel slicer model 3 black
Model: Berkel 3
Manufacturing time: 1915 – 1924
Place of origin: Holland- Rotterdam
Slicing blade diameter: 370 mm
Dimensions: width 63cm – depth 84cm – height 56cm
Note: Both vintage and replica pedestals are available
Berkel slicer model 3 replaces the models L – R – 1 – 2 and for quite nine years it remains the only model of the range. Without any doubt it is the most successful and undisputed of that time so to hand down its heart: the mechanism to its inheritor, the model 5.
Like in the previous models, the machine has the flower patterned flywheel that put a gearing into action located under the base. It drives both the blade, by means of a chain, and the shifting cart, by means of two connecting rods.
Close to the blade, the cart shifts inside a hub. While, at the opposite side, leans on a square rod thanks to a shifting felt. The two guides are supported by four small columns fixed on the base, two for each guide.
This system was adopted for the first time in 1908 by the previous model 2.
The slice adjustment clock is fixed on the base of the machine and puts a bill shaped lever into action, that is placed on the cog-wheel shaft located on the cart. This one then puts the endless screw into action where the vice comb is inserted that generates the slicing movement.
The cog-wheel is connected to a crank that, when moved on the right or left, shifts consequently the vice as you like.
The vice that fixes the product to be sliced is inserted by a slot on the shifting cart, and in the back side there is a small column with a clutched handle. While at the front side it consists of a rack rod. The two parts are connected by a toothed arm that acts on the product to be sliced.
The sharpener is particularly ingenious and innovative, and consists of a closed nickeled tin with two clicks for the sharpening.
The shoulder is round shaped as in the previous models.
In the upper part you can find the hub where are fixed the blade, the plated tray collecting the slices, the back and the front blade protectors and the detaching slice fin.
The Berkel brand label is attached in the lower part.
The manifesto of our Berkel restoration
We do ensure maximum fidelity to the historical period of reference: here’s why we apply the oven painting without the use of transparent paint, as originally done in all Berkel models.We use the original copal paint brands of the time.
In the same philosophy we carry out decorations by hand without the use of an airbrush and issue the “Certificate of Authenticity”, guaranteeing excellent operation for 5 years after delivery.